Fuel Unsaturation Effects on NOx and PAH Formation in Spray Flames F. Xiao F Suresh K. Aggarwal 10027/20119 https://indigo.uic.edu/articles/journal_contribution/Fuel_Unsaturation_Effects_on_NOx_and_PAH_Formation_in_Spray_Flames/10957085 The effect of fuel unsaturation on NOx and PAH formation in spray flames is investigated at diesel engine conditions. The directed relation graph methodology is used to develop a reduced mechanism starting from the detailed CRECK mechanism . The reduced mechanism and spray models are validated against the shock tube ignition data and high-fidelity, non-reacting and reacting spray data from the Engine Combustion Network [26]. 3-D simulations are performed using the CONVERGE software to examine the structure and emission characteristics of n-heptane and 1-heptene spray flames in a constant-volume combustion vessel. Results indicate that the combustion under diesel engine conditions is characterized by a double-flame structure with a rich premixed reaction zone (RPZ) near the flame stabilization region and a non-premixed reaction zone (NPZ) further downstream. Most of NOx is formed via thermal NO route in the NPZ, while PAH species are mainly formed in the RPZ. A small amount of NO is also formed via prompt route in the RPZ, and via N2O intermediate route in the region outside NPZ, and via NNH intermediate route in the region between RPZ and NPZ. The presence of a double bond leads to higher flame temperature and thus higher NO in 1-heptene flame than that in n-heptane flame. It also leads to the increased formation of PAH species, implying increased soot emission in 1-heptene flame than that in n-heptane flame. Reaction path analysis indicate that the increased formation of PAH species can be attributed to the significantly higher amounts of 1,3-butadiene and allene formed due to  scission reactions resulting from the presence of double bond in 1-heptene. 2018-02-12 00:00:00 Fuel Unsaturation NOx and PAH emissions N-heptane and 1-heptene spray flames 3D simulations