Numerical simulation.pdf (1.78 MB)
0/0

Numerical simulation of mixed mode (I and II) fracture behavior of pre-cracked rock using the strong discontinuity approach.

Download (1.78 MB)
journal contribution
posted on 12.05.2016 by MH Motamedi, DA Weed, CD Foster
The existence of macroscopic flaws in geomaterial structures profoundly influences their load-carrying capacity and failure patterns. This paper is devoted to the numerical investigation of mixed–mode fracture propagation in a cracked Brazilian disk (CBD) specimen by means of the embedded strong discontinuity approach (SDA). A recently modified nonassociated, three-invariant cap plasticity model with mixed isotropic/kinematic hardening is used to predict the continuum response for the intact part of the specimen. In addition, this constitutive model adopts bifurcation analysis to track the inception of new localization and crack path propagation. For the post-localization regime, a cohesive-law fracture model, able to address mixed-model failure condition, is implemented to characterize the constitutive softening behavior on the surface of discontinuity. To capture propagating fracture, the Assumed Enhanced Strain (AES) method is employed. Furthermore, particular mathematical treatments are incorporated into the simulation concerning numerical efficiency and robustness issues. Finally, the results obtained from the enhanced FE simulations are analyzed and critically compared with experimental results available in the literature.

Funding

The authors would like to acknowledge the support of the National Science Foundation, Grant no. NSF-CMMI 1030398.

History

Publisher Statement

This is the author’s version of a work that was accepted for publication in International Journal of Solids and Structures. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in International Journal of Solids and Structures, 2016. 85-86: 44-56. DOI: 10.1016/j.ijsolstr.2016.02.002.

Publisher

Elsevier Inc.

issn

0020-7683

Issue date

10/02/2016

Exports

Categories

Exports