File(s) stored somewhere else
Please note: Linked content is NOT stored on University of Illinois at Chicago and we can't guarantee its availability, quality, security or accept any liability.
Embedded Split Ring Resonator Tunable Notch Band Filter in Microstrip Transmission Lines
journal contributionposted on 22.07.2022, 18:48 authored by Farhad Farzami, Seiran Khaledian, Alex C Stutts, Besma SmidaBesma Smida, Danilo ErricoloDanilo Erricolo
Novel design techniques for tunable and fixed frequency notch band filters are presented and validated with experiments. A notch band filter based on an Embedded Split Ring Resonator (ESRR) in a Microstrip Transmission Line (MTL) is presented. The physical dimensions of the ESRR determine the filter resonance frequency, which, when combined with a Varactor (Varactor Loaded ESRRs or VLESRRs), provides a continuously tunable resonance frequency. Tunable notch bands centered from 1.7 GHz to 4.8 GHz are obtained with resonators having an unprecedented electric length of 0.05 λ0 at the lowest frequency, corresponding to a physical length of 7 mm and a total occupied area of 8.5 mm2. Two or more ESRRs are proposed to provide a deeper single notch band, a wider notch band, and/or multi notch bands. The proposed ESRRs are used jointly with a trapezoidal antenna to form 1) a notch band at 2.5 GHz; and, 2) dual notch bands at 2.5 GHz and 3.5 GHz. In addition, ESRRs are used in a Low Pass Filter (LPF) with cutoff frequency of 1 GHz to suppress undesired harmonic at 3.46 GHz and improve band rejection. The proposed MTL loaded by ESRRs, LPF and trapezoidal antenna are fabricated, measured and the results of simulations and measurements are in good agreement.